Whats Up Nails - Jumbo Clear Stamper & Scraper
$ 11.75 USD

Add to Wishlist

Whats Up Nails - Jumbo Clear Stamper & Scraper is unavailable

Leave your email address if you would like to be notified when it becomes available.

Please be careful using pure acetone on stamper head and body, read details here.

Show us your creations using our 'Jumbo Clear Stamper & Scraper' with the tags #whatsupnailsJumboStamper and #whatsupnails for a chance to be featured

Show us your creations using our 'Jumbo Clear Stamper & Scraper' with the tags #whatsupnailsJumboStamper and #whatsupnails for a chance to be featured

Designed with accuracy in mind, the clear jelly stamper comes with a see-thru head and stamper body. This stamper takes the guess work out of placing your artwork as when you look through the back of the stamper you can clear through to your nail!

Transparent cap is included.

Stamping head size: 1 1/2in (38mm)

SKU: WST01

Stamping Head Cleaning

Clean your stamper head using any sticky tape (lint roller, masking tape, Scotch tape) between uses. Do not use pure acetone or nail polish remover to clean stamper head. When you first receive your stamper it should work ideally right from opening the package but in the event it has trouble picking up stamping images you may try washing stamper head in warm soapy water and let it air dry or use acetone to prime the stamper head. Priming is using good quality acetone on a cotton pad and lightly rubbing the stamper head. Please note that some cheaper brands acetone have been known to make the stamper head cloudy. We've used Onyx Professional 100% Acetone with good results but we do receive complaints about some cheaper brands of acetone making the stamper head cloudy including Beauty Secrets brand from Sally Beauty and CVS Pharmacy generic acetone.

Stamper Body Cleaning

Never use pure acetone on the stamper body as the stamper body can become cloudy when cleaned with acetone. We recommend a gentle non-acetone remover like ZOYA Remove+ Nail Polish Remover when cleaning the stamper body.

How To Stamp

If you still have problems picking up stamping image, please check our tips & tricks about stamping:

  • Remove your new stamping plate from its packaging and remove the plastic protective film from over the metal. When you first receive your plate and after every use wipe clean your plate with acetone or non-acetone nail polish remover without oils. Сlean your stamper with tape by using the sticky side to remove dry polish.
  • Quickly apply a thick layer of nail polish in a few strokes over the design you wish to stamp. Special stamping polishes are recommended but opaque nail polishes that do not dry very fast also work well. Try another polish if you are not getting results you want.
  • Hold a plastic card firmly at a 45 degree angle and lightly scrape across the plate to remove excess polish. Try to only scrape once, do not push card to plate too hard and work as quickly as possible to avoid drying.
  • Immediately after scraping, quickly transfer the design to your stamper by lightly rolling once across the design from one side to the other or pushing once straight into the design.
  • If your image does not transfer you may need to work faster, scrape differently (less pressure or new angle), prime your stamper (with acetone or gentle nail file/buffer) or try another opaque nail polish that doesn’t dry very fast.
  • Quickly transfer the image from the stamper onto a nail with an oil free and completely dry base color. With a squishier stamper push the stamper straight to the nail, with other stamper heads it might work better to roll it once from side to side to transfer image. Remove excess nail polish from your skin and cuticles by using a flat brush or cotton swab dipped in acetone or nail polish remover, you could use tape to lift excess polish from your skin as well.
  • When design is completely dry on your nail, apply a layer of fresh top coat with as few strokes as possible. Place a big drop at the cuticle and hold brush parallel to the nail while applying trying not to touch the nail with the bristles, this helps prevents smearing.

Customer Reviews

4.4 Based on 109 Reviews
5 ★
75% 
82
4 ★
11% 
12
3 ★
4% 
4
2 ★
2% 
2
1 ★
8% 
9
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
WS
12/03/2019
Wanna S.
United States United States

Finally a stamper that works

I have used tons of different stampers in the past with no success. After trying tons of different plates, polishes and stampers, I finally gave up. I could never get the images to pick up properly. I bought this one on a whim, thinking it would be the same. This stamper works perfectly. I can use any polish, gel or regular. The stamper being clear makes placing the image a breeze. The housing cracked not long after I purchased it, but that does not affect the performance. I use tape to clean the rubber head. If you are looking for a good stamper, just buy it. You’ll love it.

LB
02/25/2019
Lesa B.
US US

Stamped clear

Love this

RC
12/24/2018
Rebecca C.
US US

Loved all my nail stuff

Loved all my nail stuff

KW
10/23/2018
Katelin W.
NZ NZ

Not the best

For how much I paid and how long it took to get here and how much hype this stamper gets. It's not worth it. It hardly works with any other polishes. U have to spend more time, money on their polishes just to get it to work. And then when u tell the company ur not happy with it they dont try help u to use it better they tell u to buy their polishes. I wish I spent my money on the bliss kiss brand stamper as they care about there customers and help you to use the stamper with any polishes. I followed her stamping for beginners video and now this stamper will work with my polish. No thanks to what'sup nails.

SM
10/01/2018
Sandi M.
CA CA

Works Perfectly!

I've had great success with this stamper! Images transfer cleanly from the plate to my nail.